24V 75mm Centrifugal Fan

  In recent years, due to continuous improvement of fan structure in our country, which makes fans’ efficiency continuously improve and noise continuously reduce, some new fans are gradually replacing some old fans.

  In order to save energy and reduce noise hazards, new fans with high efficiency and low noise should be selected as far as possible .

  In recent years, in order to optimize the user experience, some people in the intelligent toilet industry not only have high requirements on the structural quality of the product itself, but also have realized a fully automated intelligent toilet. Relying on the comfortable heating and accurate sitting bath function, the high-tech toilet has been recognized by more and more customers.

  Similarly, DC Blower 7530, our best-selling product in the smart toilet industry, is also constantly improving and updating, with the aim of bringing better experience to buyers.

  The key to the quality of the cooling fan in the intelligent toilet is the air volume. Dongguan Xingdong Electronics Co., Ltd. is a professional manufacturer of cooling fans, product quality assurance is the competitiveness of enterprises. Our technical staff can create a suitable cooling fan for your products according to your parameter requirements. Make your products competitive in the market.

The intelligent toilet cover uses two fans at most:
1.7530 blower, which is the most widely used blower for toilet cover, is usually used for ventilation and heat dissipation
The 7530 air blower enters air from the side and exits air from the air outlet at a 90 degree angle. It is used for intelligent toilet lid products and needs to be waterproof. The general waterproof grade can reach IP55, and the advanced waterproof grade can reach IP57
2.5015 blower, which is mainly used for deodorization of toilet lid, is called deodorization fan in the industry
The 5015 blower is called a deodorizing fan in the toilet lid industry. As the name implies, it is used for deodorizing the toilet lid. Like the 7530 air inlet and outlet, the fan is also at a right angle!
The above two types of blowers are used for the toilet cover. The axial fan used for the toilet cover is mainly 40 * 40 * 28

Smart toilet cooling fan cleaning tips
With the progress of society, people’s quality of life is getting better and better. The smart toilet has become a household appliance among the household appliances of the upper class. Below, we will teach you how to clean the cooling fan of the smart toilet:

Since the cooling fan of the smart toilet has not been cleaned for a long time, a lot of dust has deposited on the outside. The author first made a simple cleaning of the exterior of the smart toilet cooling fan. Next, let’s disassemble the fan. There are two small screws on the cooling fan of the smart toilet. Unscrew them, and the side near the air outlet will be loose. Gently open the metal buckle of the smart toilet cooling fan, and the side cover of the smart toilet cooling fan can be opened. Be careful not to open the buckle too far, so as not to lose its elasticity, and it will not be tight when it is put back.

When the fan is turned on, the inside of the smart toilet cooling fan is also horrible. All kinds of dense dust, especially the fan blades of the smart toilet cooling fan, have accumulated a thick layer. After simply brushing the ups and downs with a brush, I suggest that you wipe the fan blades carefully with a paper towel or cotton cloth dampened with water. It is best not to use some organic solvents, because that will easily cause the fan blades to be compatible with it. It is easier to make the fan blades brittle and accelerate aging, so water is more reliable. After careful and patient cleaning, the fan looks brand new. After adding a drop of lubricating oil to the center shaft of the fan, use the method of dismantling before and then reassemble it. At this point, the fan part is considered to be cleaned.

Tips for cleaning up!
Because the intelligent toilet cooling fan has not been cleaned for a long time, a lot of dust has also been deposited outside. The author first cleaned the outside of the intelligent toilet cooling fan. Now let’s disassemble the fan. There are two small screws on the cooling fan of the intelligent toilet. If you unscrew them, the side close to the air outlet will become loose. Gently break the metal clasp of the intelligent toilet cooling fan, and the cover plate on one side of the intelligent toilet cooling fan can be opened. Note that the clasp should not be broken at too large an angle to avoid losing elasticity, and it will not be clamped tightly when it is installed back. Turn on the fan, and the inside of the intelligent toilet cooling fan is also terrible. A thick layer of dust is accumulated, especially on the fan blades of the intelligent toilet cooling fan. After simply brushing the fan leaves with a brush, I suggest that you carefully wipe them with a paper towel or cotton cloth dipped in water. Zui should not use some organic solvents, because it is easy to cause the fan leaves to be compatible with them. It is easier to make the fan leaves brittle and accelerate aging under high temperature baking, so water is more reliable. After careful and patient cleaning, the fan has a new look. Add a drop of lubricating oil to the central shaft of the fan, and then reassemble it with the method of disassembly. The fan part has been cleaned.